Bestsellers

₦133,031.25

The Solar Roof Mount is designed to install quickly and provide a non-penetrating mounting structure for PV modules on a flat roof. The module-specific design reduces the number of components and provides for an easy assembly. The BRM utilizes high strength aluminum components and corrosion resistant hardware for long term reliability. Seasonal adjustability for maximizing production is ..

MidNite Solar MNSPD-300-DC

₦283,800.00

The MidNite Solar Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3. It is designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection. The DC SPD will work well on all DC circuits up to 300 volts as well as any 120/240 VAC circuits. The difference between the A..

MidNite Solar MNEPV63 63A DC Din Rail Mount Breaker

₦0.00

Din Rail Circuit Breakers, 150VDC PV Array Breakers Photovoltaic (PV) Array Breakers PV breakers are Hydraulic-Magnetic type and are not affected by high ambient temperatures. All breakers have a 2 year warranty.These breakers can accept wire sized AWG #6 through AWG#14. They will fit in enclosures with din rail such as: Outback Flexware PV8, Flexware PV12, Midnite MNPV3,&..

MC4 Connector (10 Pairs Male MC4 and Female MC4)

₦10,000.00

MC connector systemsThe components of the MC connector system for photovoltaics are designed to allow time-saving and safe serial and parallel wiring of PV modules for building integrated and free-standing solar installations. For practical use the connector system MC4 are available, depending on the existing modules or inverters.The interlockable MC4 connector systemsn Di..

MidNite DC Breaker, 250A, Panel Mount 125VDC

MidNite DC Breaker, 250A, Panel Mount 125VDC

Brand: MidNite Solar
Product Code: MNEDC250
Availability: In Stock

₦0.00

0 reviews / Write a review

Description
Reviews (0)

The BR-DC175 and BR-DC250 are the same DC breakers installed in the MidNite and Magnum Panels system enclosures, and included with the MPX extensions. These breakers function as the inverter’s DC disconnect switch and can be used as the battery-to-inverter circuit protection in most installations. These breakers are specifically designed and tested to work with MidNite Solar and Magnum inverters to provide the delay time needed to minimize nuisance breaker tripping.

Specification• Approvals
* UL 489 Listed Branch Circuit-Breaker
* CSA Certified C22.2 No. 5
•Interrupting Capacity 10,000 amperes at 160VDC, 65,000 amperes at 65VDC
•Trip Time Delay: 53 (DC long delay),
• Recommended Torque:: 220 - 230 inch-pounds (using 3/8”bolts to connect cables - having ring lug terminals - to the 3/8-16 captive nuts on the copper extensions).
• Weight: ~2.25 lbs
• Terminal connections: Two Front-accessible, tinned-copper extensions,each with a 3/8-16 x 1” bolt and washer screwed into a captive nut

categories