Bestsellers

₦133,031.25

The Solar Roof Mount is designed to install quickly and provide a non-penetrating mounting structure for PV modules on a flat roof. The module-specific design reduces the number of components and provides for an easy assembly. The BRM utilizes high strength aluminum components and corrosion resistant hardware for long term reliability. Seasonal adjustability for maximizing production is ..

MidNite Solar MNSPD-300-DC

₦283,800.00

The MidNite Solar Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3. It is designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection. The DC SPD will work well on all DC circuits up to 300 volts as well as any 120/240 VAC circuits. The difference between the A..

MidNite Solar MNEPV63 63A DC Din Rail Mount Breaker

₦0.00

Din Rail Circuit Breakers, 150VDC PV Array Breakers Photovoltaic (PV) Array Breakers PV breakers are Hydraulic-Magnetic type and are not affected by high ambient temperatures. All breakers have a 2 year warranty.These breakers can accept wire sized AWG #6 through AWG#14. They will fit in enclosures with din rail such as: Outback Flexware PV8, Flexware PV12, Midnite MNPV3,&..

MC4 Connector (10 Pairs Male MC4 and Female MC4)

₦10,000.00

MC connector systemsThe components of the MC connector system for photovoltaics are designed to allow time-saving and safe serial and parallel wiring of PV modules for building integrated and free-standing solar installations. For practical use the connector system MC4 are available, depending on the existing modules or inverters.The interlockable MC4 connector systemsn Di..

Imo Switch {SI25-PEL64R-4 from IMO Precision Controls}

Product Code: SI25-PEL64R-4
Availability: In Stock

₦0.00

0 reviews / Write a review

Spec Sheet

The SI25-PEL64R-4 from IMO Precision Controls is a rotary actuator switch lockable off in plastic enclosure. This True DC isolator is specifically developed as a True DC switch to disconnect the DC/AC inverter from the photovoltaic panels. All photovoltaic installations have to be equipped with DC isolators in accordance with IEC 60364-7-712. The IMO SI is a True DC switch not an AC version de-rated or re-wired for DC operation. It includes operator-independent switching mechanism, high-speed trigger ratchet switching, IP65 rated enclosure, fully enclosed internal switch without additional wiring for maximum safety, Knife-edge contacts and arc cooling chambers, maximum 1Nm torque for easy operation, compact space-saving design and 16mm² box terminals for easy wiring.

Rated thermal current is 25A
Rated insulation voltage is 1000V suitable at overvoltage I to III, pollution degree 3, Uimp=8KV
A distance of contact per pole is 8mm
2 poles in series and number of strings are 2
Lockable off safe-lock
Self-extinguishing plastic enclosure
M25 cable gland entry option
NEMA type 3R, IP66
Operating temperature range from -40°C to 45°C
UL508i file number E362605, UL508 cRUus file number E146487, CE, TUV, GOST, IEC CB approvals

Applications

Industrial

categories